Jump to year -> [1958-09-01] [1961-09-18] [1964-08-01] [1964-11-01] [1964-12-01] [1965-01-01] [1966-07-01] [1969-01-01] [1976-09-01] [1981-11-01] [1984-03-01] [1988-04-01] [1990-01-01] [1993-01-01] [1994-07-01] [2002-01-01] [2015-01-01]
[SI]: 40000 Turbine, Generator and Auxiliaries Documents

Documents below are listed chronologically. Use the links on the left or below to filter documents by keyword. Use the links above to jump to a specific year on this page.

Number of files: 102


    1958-09-01---------Jump to [Top]
  1. NPD-2 Design Description, OPG, 1958-09-01. Doc type: Report.
    Summary: This booklet presents a detailed design description of the NPD-2 station, a joint project of AECL, CGE and the Hydro-Electric Power Commission of Ontario.
    Keywords: [Concept] General [SI] 00000 General Project 30000 Reactor, Steam Generators and Auxiliaries 37000 Fuel 40000 Turbine, Generator and Auxiliaries 60000 Instrumentation and Control [Discipline] Nuclear Engineering [Topic] Intro and Overview Physical Description Process Systems [Phase] Design Description [Audience] College Engineer High Technician Ugrad
    - Canada's First Nuclear Power Station CGE-NPD-DD-Sept1958.pdf (2766 kb)

  2. 1961-09-18---------Jump to [Top]
  3. NPD, a Description of, by J.L Olsen, OPG, 1961-09-18. Doc type: Presentation.
    Summary: Nuclear Power Demonstration. An illustrated talk presented at the Seventh AECL Symposium on Atomic Energy, Chalk River, September 18, 1961.
    Keywords: [Concept] General [SI] 00000 General Project 30000 Reactor, Steam Generators and Auxiliaries 37000 Fuel 40000 Turbine, Generator and Auxiliaries 60000 Instrumentation and Control [Discipline] Nuclear Engineering [Topic] Intro and Overview Physical Description Process Systems [Phase] Design Description [Audience] College Engineer High Technician Ugrad
    - Canada's First Nuclear Power Station CAPD10--Sept1961NPD-Description.pdf (5637 kb)

  4. 1964-08-01---------Jump to [Top]
  5. Heat and Thermodynamics, Course 1-2.5, Nuclear Electric GS Technical Training Course, by D. Dueck, OPG, 1964-08-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Mechanical [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 8. NEGS-TT1-2-5-1964.pdf (7809 kb)
  6. Heat and Thermodynamics, Course 2-2.5, Nuclear Electric GS Technical Training Course, by D. Dueck, OPG, 1964-08-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Mechanical [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Ugrad
    - Full course, sections 1 to 10. NEGS-TT2-2-5-1964.pdf (3387 kb)
  7. Heat and Thermodynamics, Course 1-2.5, Nuclear Electric GS Technical Training Course, by D. Dueck, OPG, 1964-08-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Mechanical [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 10. NEGS-TT3-2-5-1964.pdf (4826 kb)

  8. 1964-11-01---------Jump to [Top]
  9. Turbine, Generator and Auxiliaries, Course 3-3.4, Nuclear Electric GS Technical Training Course, by D.Dueck, OPG, 1964-11-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 9 NEGS-TT3-3-4-1964.pdf (6102 kb)
  10. Turbine, Generator and Auxiliaries, Course 4-3.4, Nuclear Electric GS Technical Training Course, by D.Dueck, OPG, 1964-11-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 7 NEGS-TT4-3-4-1964.pdf (2375 kb)

  11. 1964-12-01---------Jump to [Top]
  12. Turbine, Generator and Auxiliaries, Course 2-3.4, Nuclear Electric GS Technical Training Course, by D.Dueck, OPG, 1964-12-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 10 NEGS-TT2-3-4-1964.pdf (7516 kb)

  13. 1965-01-01---------Jump to [Top]
  14. Turbine, Generator and Auxiliaries, Course 1-3.4, Nuclear Electric GS Technical Training Course, by Dick Dueck, OPG, 1965-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 7 NEGS-TT1-3-4-1965.pdf (4837 kb)

  15. 1966-07-01---------Jump to [Top]
  16. Heat and Thermodynamics, Course 1A25, Nuclear Training Course , by George Howie, OPG, 1966-07-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 10. OH-1A25-1966.pdf (5569 kb)

  17. 1969-01-01---------Jump to [Top]
  18. Pickering Generating Station Design Description, OPG, 1969-01-01. Doc type: Report.
    Summary:
    Keywords: [Concept] Overview [SI] 00000 General Project 10000 Site and Improvements 20000 Buildings and Structures 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries 50000 Electric Power Systems 60000 Instrumentation and Control [Discipline] General Engineering Nuclear Engineering [Topic] Intro and Overview Physical Description Process Systems [Phase] Design Operation Safety [Audience] College Engineer Technician Ugrad
    - OH-PickeringDD1969.pdf (23589 kb)

  19. 1976-09-01---------Jump to [Top]
  20. Turbine, Generator and Auxiliaries, Course 134, Nuclear Training Centre, OPG, 1976-09-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051100.pdf (3779 kb)
    - 134.00-00 Index and Objectives, 20051101.pdf (355 kb)
    - 134.00-01 Turbine Theory, 20051102.pdf (793 kb)
    - 134.00-02 Turbine Operational Performance, 20051103.pdf (534 kb)
    - 134.00-03 Turbine Operational Problems, 20051104.pdf (554 kb)
    - 134.00-04 Turbine Start-Up, 20051105.pdf (365 kb)
    - 134.00-05 Factors Limiting Startup and Rates of Loading, 20051106.pdf (561 kb)
    - 134.00-06 Reliability and Testing Requirements, 20051107.pdf (253 kb)
    - 134.00-07 Maintenance, 20051108.pdf (404 kb)

  21. 1981-11-01---------Jump to [Top]
  22. Heat and Thermodynamics, Course 125, Nuclear Training Centre, OPG, 1981-11-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050100.pdf (6328 kb)
    - Module B.7 Course Procedures, 20050101.pdf (302 kb)
    - Module B.6 Basics, 20050102.pdf (339 kb)
    - Module B.5 Steam Tables, 20050103.pdf (740 kb)
    - Module B.4.2 Entropy, Throttling and Molier Diagram, 20050104.pdf (904 kb)
    - Module B.4.1 Turbine With Reheat, 20050105.pdf (684 kb)
    - Module B.3.2 Feedheater Operation, 20050106.pdf (569 kb)
    - Module B.3.1 Condenser Performance, 20050107.pdf (594 kb)
    - Module B.2 Steam Generator, 20050108.pdf (477 kb)
    - Module B.1 Reactor, 20050109.pdf (826 kb)
    - B.6 Self Evaluation, 20050110.pdf (87 kb)
    - B.5 Self Evaluation, 20050111.pdf (69 kb)
    - B.4.2 Self Evaluation, 20050112.pdf (118 kb)
    - B.4.1 Self Evaluation, 20050113.pdf (103 kb)
    - B.3.2 Self Evaluation, 20050114.pdf (121 kb)
    - B.3.1 Self Evaluation, 20050115.pdf (118 kb)
    - B.2 Self Evaluation, 20050116.pdf (137 kb)
    - B.1 Self Evaluation, 20050117.pdf (102 kb)
    - Criterion Tests, 20050118.pdf (134 kb)

  23. 1984-03-01---------Jump to [Top]
  24. Heat and Thermodynamics, Course PI 25, Nuclear Training Centre, OPG, 1984-03-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: expansion and contraction, heat transfer, pressure control, Mollier diagrams, efficiency, the CANDU cycle.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050200.pdf (3028 kb)
    - 25-0 Introduction and Course Procedures, 20050201.pdf (336 kb)
    - 25-1 Basics, 20050202.pdf (471 kb)
    - 25-2 Expansion and Contraction, 20050203.pdf (351 kb)
    - 25-3 Heat Transfer Calculations, 20050204.pdf (183 kb)
    - 25-4 Pressure Control, 20050205.pdf (200 kb)
    - 25-5 Mechanisms of Heat Transfer, 20050206.pdf (144 kb)
    - 25-6 Mollier Diagrams and The Turbine Process, 20050207.pdf (679 kb)
    - 25-7 Efficiency and The CANDU Cycle, 20050208.pdf (298 kb)
    - 25-8 Criterion Tests, 20050209.pdf (105 kb)
    - 25-9 Self Evaluation Answer Sheet, 20050210.pdf (309 kb)

  25. 1988-04-01---------Jump to [Top]
  26. Heat and Thermodynamics, Course 225, Nuclear Training Centre, OPG, 1988-04-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine with reheat, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20043100.pdf (4667 kb)
    - Index, 20043101.pdf (208 kb)
    - Module 1 Basics, 20043102.pdf (404 kb)
    - Module 2 Steam Tables, 20043103.pdf (636 kb)
    - Module 3 Entropy, Throttling and Mollier Diagrams, 20043104.pdf (701 kb)
    - Module 4 Turbine with Reheat, 20043105.pdf (611 kb)
    - Module 5 Feedheater Operation, 20043106.pdf (511 kb)
    - Module 6 Condenser Performance, 20043107.pdf (546 kb)
    - Module 7 Steam Generator, 20043108.pdf (382 kb)
    - Module 8 Reactor, 20043109.pdf (710 kb)

  27. 1990-01-01---------Jump to [Top]
  28. Turbine and Auxiliaries, Course PI 34 / TIMS Ref. PI 3004, Nuclear Training Centre, OPG, 1990-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051000.pdf (11938 kb)
    - PI 34.00-00 Index and Objectives, 20051001.pdf (619 kb)
    - 334.00-01 The Steam Turbine, 20051002.pdf (676 kb)
    - 234.00-01 Turbine Construction, 20051003.pdf (1037 kb)
    - 334.00-03 The Steam System, 20051004.pdf (517 kb)
    - 234.00-02 Steam Control to the Turbine, 20051005.pdf (514 kb)
    - 334.00-07 The Condenser, 20051006.pdf (476 kb)
    - PI 25-06 The Mollier Diagram and the Turbine Processes, 20051007.pdf (1214 kb)
    - 334.00-08 Feedwater Heating System -1, 20051008.pdf (212 kb)
    - 334.00-09 Feedwater Heating System -2, 20051009.pdf (307 kb)
    - 234.00-07 Feedwater Control and Operation, 20051010.pdf (586 kb)
    - PI 24.21-01 Secondary Heat Transport System - Impurities, 20051011.pdf (230 kb)
    - PI 24.21-02 Chemical Additives and Blowdown, 20051012.pdf (274 kb)
    - PI 25-07 Efficiency of the CANDU Turbine Cycle, 20051013.pdf (513 kb)
    - 234.00-03 Steam Valve Hydraulic Control, 20051014.pdf (255 kb)
    - 234.00-04 Governor Operation, 20051015.pdf (516 kb)
    - 234.00-05 Turbine Governors, 20051016.pdf (677 kb)
    - 334.00-10 The Lubricating Oil System, 20051017.pdf (275 kb)
    - 334.00-11 The Turning Gear, 20051018.pdf (113 kb)
    - 234.00-06 Turbine Operational Problems, 20051019.pdf (568 kb)
    - 234.00-08 Factors Limiting Startup and Rates of Loading, 20051020.pdf (887 kb)
    - 334.00-13 appendix 1 Ontario Hydro Nuclear Turbine Types, 20051021.pdf (245 kb)

  29. 1993-01-01---------Jump to [Top]
  30. Principes de Science et de Fonctionnement des Réacteurs - Chaleur et Thermodynamique, CNSC, 1993-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Chaleur et Thermodynamique 20070900.pdf (850 kb)

  31. 1994-07-01---------Jump to [Top]
  32. Turbine and Auxiliaries, Nuclear Training Course 234, OPG, 1994-07-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Module 234-00 Introduction to the Course 20042400.pdf (182 kb)
    - Module 234-01 The Steam Turbine, 20042401.pdf (760 kb)
    - Module 234-02 The Boiler, 20042402.pdf (851 kb)
    - Module 234-03 The Main Steam System, 20042403.pdf (1399 kb)
    - Module 234-04 Auxiliary Steam Systems, 20042404.pdf (684 kb)
    - Module 234-05 The Condenser and its Auxiliary Systems, 20042405.pdf (1091 kb)
    - Module 234-06 The Condensate, the Boiler Feed and Their Auxiliary Systems, 20042406.pdf (1736 kb)
    - Module 234-07 The Turbine Governing System, 20042407.pdf (724 kb)
    - Module 234-08 The Turbine Supervisory System, 20042408.pdf (273 kb)
    - Module 234-09 The Turning Gear, 20042409.pdf (305 kb)
    - Module 234-10 The Turbine Lubricating System, 20042410.pdf (503 kb)
    - Module 234-11 Startup and Loading, 20042411.pdf (1220 kb)
    - Module 234-12 Unloading and Shutdown, 20042412.pdf (333 kb)
    - Module 234-13 Special Modes of Operation and Accidents, 20042413.pdf (895 kb)
    - Module 234-14 Turbine Operational Problems, 20042414.pdf (850 kb)

  33. 2002-01-01---------Jump to [Top]
  34. Heat and Thermodynamics Course, CNSC, 2002-01-01. Doc type: Course.
    Summary: This module covers the following areas pertaining to thermodynamics: Introduction, Heat and Thermodynamics - The Basics, Reactor and Heat Transport System Normal Operation, Heat Transport System Component Operation
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Cover Page 20030900.pdf (83 kb)
    - , 20030901.pdf (647 kb)
    - Presentation, 20030902.pdf (1557 kb)

  35. 2015-01-01---------Jump to [Top]
  36. The Essential CANDU, by Wm.J. Garland, Editor-in-Chief, UNENE, 2015-01-01. Doc type: Book.
    Summary: The Essential CANDU is a textbook about nuclear science and engineering pertaining to CANDU reactors using CANDU as the reference design. This distinguishes it from comparable textbooks based on PWR reactors. This is not a product description of CANDU per se. The book emphasizes theory over other aspects of nuclear science. This is a textbook about CANDU nuclear reactor and power plant engineering, not just the reactor physics of the core.
    Keywords: [Concept] General [SI] 30000 Reactor, Steam Generators and Auxiliaries 35000 Fuel Transfer and Storage 36000 Steam Generator Steam and Water Systems 37000 Fuel 40000 Turbine, Generator and Auxiliaries 60000 Instrumentation and Control [Discipline] Chemistry General Engineering Health Physics Nuclear Engineering [Topic] Corrosion Fluid Mechanics Fuel Management Heat Transfer Important Parameters Physical Description Process Systems Radiation Reactor Physics Safety Thermalhydraulics Thermodynamics Waste Handling [Phase] Design Design Analysis Design Description Design Evolution Safety Safety Analysis [Audience] Engineer Grad Ugrad
    - A textbook on the CANDU nuclear power plant technology. press_release-Jan2016.pdf (382 kb)
---end of page---